Tag Archives: Septic Trucks

Septic Trucks

While septic trucks are mostly used for dirty suctioning jobs, they still require the same level of care and maintenance as any other vehicle, if not more. Since the vehicle is continuously exposed to liquid waste, its components are more prone to corrosion and disintegration. By giving it the proper care and maintenance, the condition of the vacuum truck can remain relatively close to when it was first purchased and its serviceable life can be considerably extended.

Care of this equipment involves the regular maintenance of all of its components. Like most equipment with truck frames, their maintenance can be categorized into two major parts: the base frame and the vacuum unit components. Used Septic Trucks

Base Frame Maintenance

The main body of the truck is a standard frame which can be used and configured for various applications. Since the frame is generic, it also shares the same elements as other equipment made by the same manufacturer. For example, a certain base frame model can be configured to be used as the base for a cherry picker or a septic truck.

Due to these similarities, the care and maintenance required for each particular part will be quite similar. The mostessential thing to consider in maintenance of base frame is that it should meet the frequency and interval guidelines set by the manufacturer. The following are some of the standard maintenance routines for the base frame.

Vacuum Unit Maintenance

While the base frame requires scheduled maintenance, the vacuum unit requires daily maintenance. This is because it is the part of the vehicle that is exposed to the waste liquid and is more prone to corrosion. Even though a vacuum truck has stainless steel components, it still requires daily cleaning to lengthen the life of the equipment.

Daily Emptying and Washout - Waste liquids are highly corrosive and easily damage metal components. To prevent rust from forming on the components of the vacuum unit, it is advisable to empty the tank's contents daily, followed by flushing the tank to get rid of any remaining debris. The entire unit should also be washed and dried at the end of the day to prevent rust. Used Septic Trucks for Sale

Filter Replacement - Some vacuum units are equipped with a filter to separate the liquid and air from the solid debris. This filter will wear out over time and could develop large holes where debris can enter, wearing down the vanes of the vacuum much faster. To prevent this from happening, always replace the vacuum filter as recommended by the manufacturer.

Regular Oil Replacement - Oil replacement is also particularly important to the vacuum pump. Because the pump is designed to draw in liquids, it can also draw in moisture that will contaminate its oil. To prevent early deterioration of the machine, always replace the oil regularly to get rid of any contaminants that could damage the internal components. Septic Trucks for Sale

 

Septic Trucks

Septic vacuum trucks used to suction out septic tanks are highly specialized industrial vehicles, designed to withstand the rigors of this unsavory job. Daily maintenance and inspections are a priority to ensure things are running correctly; being carefully cleaned after emptying is part of that maintenance. Constantly in contact with infectious and corrosive waste material, these industrial units need adequate protection from harmful elements as do their operators. Septic Trucks

A septic pumping job is far from over when the vacuum truck leaves an area after having emptied the septic reservoir. Obviously, the unit's tank needs to be emptied at a designated dumping facility. Once that has been completed, it is important to clean the vehicle, inside and out, and prepare it for the next day's use. Septic Truck For Sale

Cleaning Procedures

Cleaning the inside of a septic truck varies depending on the type of tank, although most have two utility hole openings for interior access for this very purpose.

 

Water or Vibration Removal - The interior is sprayed with water and disinfectants where applicable, removing any sludge on the bottom. If there is sludge that is difficult to take out, a device called a vibrator can be attached to vibrate the tank, loosening the inside layers of solid material.

 

Manual Removal - If the above method does not work or if sludge that has been inside the tank for a while, the only way to eliminate it is manually. Operators have to either enter the tank or work from the manholes, digging out any residual material. Once the interior of the vacuum tank and hoses have been properly cleaned of all liquid and stuck-on solid materials, the exterior of the truck can be cleaned to remove any residual waste. Used Septic Trucks

 

Wash Stations - For safety reasons, wash stations are provided with wash water bins. Throughout the entire cleaning process, wash water runoff is collected in large bins since this, too, is now considered to be contaminated. The water in these bins will then be added to the sewage reservoirs.

 

Only after a thorough cleansing is the vacuum truck considered to be ready for use. There should be little or no trace of any material remaining that was in the truck when the job was completed, making it safe for any subsequent jobs.

Keeping the interior of a septic truck's tank clean is not easy; however, for the safety provided it is well worth the extra effort. It will also reduce the risks involved when someone has to climb in and dig out the sludge - something that every operator should appreciate. Hopefully, this article has provided some valuable insight into the importance of clean a septic truck tank when the job is done! Used Septic Trucks For Sale